9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-693004.png)
3. Disconnect the compressed air, remove the air nipple and the flywheel locking segment.
4. Turn the crankshaft to the 0° marking and then 45°.
5. Remove the protective sleeves and fit the valve tappets.
6. Fit the camshafts and bearing caps, starting where the cams point downwards and press on the tappets. Bearing caps marked 1-5 for the inlet side,
6-10 for the exhaust side.
Tightening torque 15 Nm (11 ft. lbs.).
Important: The black bolts have an oilway and should be fitted on the spark plug side.
7. Line up the marks on the camshaft with their timing marks and turn the crankshaft back to the O mark.
