saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Blower Motor Resistor|Specifications|Page 6241 > < Blower Motor Resistor|Specifications|Page 6239
Page 7
background image

15. Remove the wiper arm bracket over the ventilation fan, 3 bolts.
16. Free the cable harness from the cover over the ventilation fan (fastened with clips).
17. Remove the cover above the ventilation fan, 2 screws at the front edge and 2 screws at the rear edge.

Lift the cover to one side and remove it.

18. Lift out the ventilation fan, cut the cable tie and unplug the fan connector.
19. Pull up the wiring harness including the rubber seal and cut the cable tie.

Blower Motor Resistor|Specifications|Page 6241 > < Blower Motor Resistor|Specifications|Page 6239