9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-593001.png)
Wheels: Testing and Inspection
Checking The Wheels
Pressed steel wheels
On a correctly fitted wheel, radial runout A (out-of-round) must not exceed 0.6 mm. Runout B must not exceed 0.8 mm.
Light alloy wheels
On a correctly fitted wheel, radial runout (out-of-round) must not exceed 0.5 mm. Runout B must not exceed 0.5 mm.
Important: To avoid damage to the wheels during balancing, shims or spacers should be used as protection.
