9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-999001.png)
Oxygen Sensor: Service and Repair
Rear Oxygen Sensor
Rear oxygen sensor, B235E/R
To remove
IMPORTANT
The cables must not be twisted. The oxygen sensor is very sensitive to impact and jolting and must be handled with care.
1. Remove the upper engine cover.
2. Remove the oxygen sensor connector from the holder by pressing the lugs together as shown in the illustration.
3. Uncut the cable tie to the oxygen sensor and draw out the cables.
4. Raise the car.
