saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Throttle Cable/Linkage|Service and Repair|Page 3934 > < Throttle Cable/Linkage|Service and Repair|Page 3932
Page 3
background image

7. Remove the engine cover by releasing the holders one at a time starting at the oil filler. Remove the cover above the throttle valve.
8. Withdraw the cable and its sheathing through the rubber bush in the bulkhead.

9. Disconnect the throttle cable from the throttle body.

10. Turn the lock clip for the throttle cable adjuster and then pull out the sheathing.

To fit

NOTE:  Spray the connector with Kontakt 61, part no.30 04 520, before plugging in.

Throttle Cable/Linkage|Service and Repair|Page 3934 > < Throttle Cable/Linkage|Service and Repair|Page 3932