saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear Cross-Member Bushing|Service and Repair|Page 5748 > < Rear Cross-Member|Specifications|Page 5744
Page 1
background image

Rear Cross-Member Bushing: Service and Repair

Subframe bushes 

To remove 
1. Raise the car and remove the rear wheel on the side in question.
2. Unhook the exhaust system's rear and centre rubber hangers. Hang up the exhaust system so that it does not put too much of a strain on the front

rubber hangers and flexible section.

3. Unbolt the lower transverse link from the longitudinal link.
4. Unbolt the upper transverse link from the longitudinal link.

Rear Cross-Member Bushing|Service and Repair|Page 5748 > < Rear Cross-Member|Specifications|Page 5744