9-5 (9600) L4-2.3L Turbo (B235) (2001)
12. Unplug the connector from the sensor and allow it to hang from the headlining.
13. Remove the upper windscreen moulding.
14. When replacing glued windscreens, use 82 93 714 Kit, window removal tool. If the windscreen is so damaged that the suction cups do not adhere,
use 30 14 099 Handle for cutting wire and saw out the windscreen with the help of a co-worker.
WARNING: Use the protective equipment that is supplied with the windscreen removal and adhesive kit, such as the goggles and
protective gloves.
15. Measure out 6.5 m cutting wire.
16. Insert the chisel through the glue joint from the inside of the windscreen in the centre of its lower edge.