9-5 (9600) L4-2.3L Turbo (B235) HO (2003)
Note: There is an O-ring on each connection.
Have a receptacle handy to catch any oil from the oil cooler/hoses.
6. Plug the hoses.
7. Lower the oil cooler.
To fit
Note: Check the roundness of the O-rings and change them as necessary.
1. Fit the O-rings. Coat them with Gleitmo 805, part. No. 30 06 442.
2. Fit the oil cooler in reverse order. Fill the it with the recommended motor oil.
Tightening torques:
Oil cooler pipe, nut: 10 Nm (7.4 ft. lbs.)
Charge air cooler/oil cooler: 8 Nm (5.9 ft. lbs.)
3. When the oil cooler is fitted, start the engine and check for any oil leaks.
4. Switch off the engine and check the oil level after about 5 minutes.