9-5 (9600) L4-2.3L Turbo (B235) HO (2003)
10. Reverse the insert in the tool and position the tool with the V notch directly over one of the shanks of the link.
Rivet the shanks with a force of 15 Nm (11 ft. lbs.).
Repeat for the other shank.
11. Check the riveting by checking the compressed shank diameter with a vernier caliper.
The correct diameter is 0 3.4 - 3.6 mm.
12. Remove the cloth and shank support.
13. Reassemble and fit the chain tensioner using a new washer. Fit the plug with a new O-ring sparingly greased with Vaseline.
Tightening torque, chain tensioner 63 Nm (46 ft. lbs.)
Tightening torque, plug 22 Nm (16 ft. lbs.)