9-5 (9600) L4-2.3L Turbo (B235) HO (2003)
13. Free the cable harness from the cover over the ventilation fan (fastened with clips).
14. Cut the cable tie and detach the connector to the ventilation fan. Detach and extract the connector from the cover.
IMPORTANT: Be careful that the pollen filter is not damaged during removal.
15. Bend forward the bulkhead panel slightly to make it easier to remove the fan from the bulkhead partition space. At the same time, lift the fan and
angle it towards the dismantled stay in order to remove it from the bulkhead partition space.
To fit
IMPORTANT: Take care so as not to damage the ventilation fan during installation.
1. Bend forward the bulkhead panel slightly and insert the ventilation fan at an angle from the side of the bulkhead partition space.