9-5 (9600) L4-2.3L Turbo (B235) HO (2003)
Seat Belt: Service and Repair
Rear-Seat Belts, 4D
To remove
1
Remove the C-pillar trim (fastened with clips).
2
Unscrew the lower seat-belt mounting and remove the strap guide from the C-pillar trim.
Draw the belt through the C-pillar trim.
3
Remove the upper belt mounting from the C-pillar, 2 nuts.
To fit
IMPORTANT
Ensure that the belt runs correctly.
Check that the door seals fit correctly.
Fit in reverse order.
Tightening torques:
Inertia reel mounting nuts 45 Nm (33 lbf ft).
Floor mounting 45 Nm (33 lbf ft).