9-5 (9600) L4-2.3L Turbo (B235) HO (2003)
Seat Belt Tensioner: Service and Repair
Inertia Reel With Belt Tensioner
To remove
WARNING
All Saab 9-5 models are equipped as standard with the SRS, including belt tensioners.
Work in accordance with the safety and handling instructions.
1
Ignition switch in the OFF position.
2
Move the seat as far forward as possible.
3
Undo the seat-belt mounting for the front seat by pressing in the catch with a bent screwdriver, see dimension illustration.
4
Pull off the B-pillar trim (fastened with clips) and lift the pillar trim up out of the air duct.
5
Remove the strap guide and pull the belt through the B-pillar trim.
6
Unplug the connector for the belt tensioner.
7
Remove the inertia reel and belt tensioner, 2 nuts and 1 screw.
To fit