9-5 (9600) L4-2.3L Turbo (B235) HO (2003)
/l4-2.3l_turbo_(b235)_ho/Page-1828001.png)
Seals and Gaskets: Service and Repair
O-Ring & Sealing Ring In Retainer
O-Ring And Sealing Ring In Seal Retainer, Left-Hand
To Remove
Removed gearbox
1. Undo the five bolts on the seal retainer and remove the seal retainer. Keep shims, bolts and the seal retainer in a safe place.
2. Press out the sealing ring using 87 91 311 Sleeve, driver shaft bearing and support 87 92 236.
3. Detach the O-ring with a small screwdriver or similar.
To Fit
1. Press on the seal ring with drift 87 92 657 until it stops. Use tool 87 92 236 as support.
