saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Antenna, Navigation > < Antenna Amplifier (4D)|Page 9881
Page 2
background image

1. Fit the antenna amplifier and tighten the nuts.
2. Plug in all cables to the antenna amplifier.

3. Carefully lift up the headlining and fit the two clips in the roof.
4. Refit the C-pillar trims and fasteners over the rear side windows.
5. Fit the roof covers over the rear side windows and refit the D-pillar trim.
6. Plug in the lighting and fit the rear roof cover.

Important:  Handle the HF connector (2) with care. Exercise care when undoing the high frequency connector, Fuba GO-NOGO. Disconnection
must be performed correctly so as not to damage the connector. See Antenna amplifier (4D)

Antenna, Navigation > < Antenna Amplifier (4D)|Page 9881