9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
/l4-2.3l_turbo_(2.3hot)/Page-2848002.png)
7. Detach the sensor from the holder.
To fit
1. Plug in the connector to the sensor.
2. Fit the sensor into the holder. Make sure the guide pin is in the correct position.
3. Guide the tabs at the front of the protective shell towards the screws. Make sure the sensor is positioned correctly in the hole of the bumper.
4. Guide the shell in the side grooves. Make sure the corners of the protection shell do not damage the paint work.
