9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
Saab Information Display (SID): Procedures
Service Indicator
Service Indicator
Reset the service indicator by first confirming the message by briefly pressing the CLEAR button. Then press in the CLEAR button for 8 seconds.
CLEAR is shown after 4 seconds and then SERVICE is shown for another 4 seconds, indicating that the service indicator is reset.
Setting The Saab Information Display (SID)
Saab Information Display (SID)
Setting the clock
Set the correct time with the buttons on the left-hand side under the clock.
Setting the date, SID 1
^
Advance the trip computer with the "up" or "down" button until the temperature and date are shown.
^
Set the correct date by simultaneously pressing in the CLEAR and "down" buttons for about 1 second until an audible signal is heard.
^
Set the year with the "up" or "down" button.
^
Briefly press in the CLEAR button and set the correct month with the "up" or "down" button.
^
Briefly press in the CLEAR button and set the correct day with the "up" or "down" button.
^
Press the CLEAR button once again and the trip computer will return to normal.
Selecting the units of measurement, SID 1
The trip computer has four different series of measurement units: