9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
/l4-2.3l_turbo_(2.3hot)/Page-3331003.png)
3. Close the hatch.
4. Adjust the hatch so that it is lying flush with the edges of the roof.
IMPORTANT: The front of the hatch must not be too high.
5. Tighten the screws.
6. Fit the two covers over the screws.
7. Open the rear of the hatch so that the cover strip can be fitted.
8. Press home the clips on the rear edge of the cover strip.
9. Close the rear edge of the hatch and open the hatch slightly so that the screws become accessible.
Tighten the screws.
10. Close the hatch and tilt the rear edge.
11. Check that the clips remain in place on the rear edge.
12. Check the function.
