saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Oil Sump (In Car)|Page 3146 > < Oil Sump (In Car)|Page 3144
Page 3
background image

7. Fit the crankcase ventilation hose.
8. Fit the gearbox cover plate.

9. Clean the joints, grease the studs of the turbocharger with Molycote 1000, part no. 30 20 971, and fit the exhaust pipe.

10. Check that the oil plug has been tightened and lower the car.
11. Tighten the upper bolts on the exhaust pipe.
12. Plug in the oxygen sensor cables.
13. Fit the heat shield over the exhaust manifold and turbo bypass pipe.
14. Fill with engine oil and put back the dipstick.

Oil Sump (In Car)|Page 3146 > < Oil Sump (In Car)|Page 3144