saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Compressor Clutch|Service and Repair|Page 8833 > < Compressor Clutch|Service and Repair|Page 8831
Page 6
background image

NOTE:  If the electromagnetic clutch sticks, tap it with a plastic hammer until it becomes loose.

12. Remove the circlip holding the solenoid winding and lift it off.

NOTE:  If the solenoid winding sticks, carefully bend with a screwdriver so that the guide pin releases from the groove.

To fit

1. Set the solenoid winding in place with the guide pin in the groove on the compressor housing. Check that the windings run correctly. Attach the

circlip.

Compressor Clutch|Service and Repair|Page 8833 > < Compressor Clutch|Service and Repair|Page 8831