9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
/l4-2.3l_turbo_(2.3hot)/Page-3591001.png)
Maintenance Required Lamp/Indicator: Service and Repair
Service Message, Petrol Driven Cars
General
The SID control module is fitted with a service indicator which displays a "Time for Service. Contact workshop." message on the display when it is time
to service the car. The timing of this is determined by the distance driven and the elapsed time since the last service.
The service interval is programmable and is programmed during production according to the various markets. If necessary, the interval can be changed
using the diagnostic tool.
Activation of the service message
Depending upon which occurs first, the service message is displayed either when the day counter reaches the maximum number of days or when 1000km
or 600miles remain to the next service.
The message is displayed when the ignition is switched on in conjuction with "CHECKING".
Manual Reset
The service message is reset by holding the CLR button depressed for at least 8seconds. An acoustic signal is sounded when the deletion is complete.
The message can only be deleted when it is displayed on the SID. The reset initiates a new service interval and zeroes the day counter.
Automatic Reset
The service message is reset automatically when it has been activated (shown) on the display 60 times.
Reset with diagnostic tool
The service message can be reset using the diagnostic tool even if it has not been activated. This is useful if a service is carried out before a long journey
for example. The time to next service is then calculated from the current odometer reading. On resetting, the day counter is also zeroed at the same time.
