9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
/l4-2.3l_turbo_(2.3hot)/Page-1482002.png)
6. Unplug the connector.
7. Cut both cable ties.
8. Undo the hose clip at the tank and the vent pipe with tool 83 95 261.
9. Clean up.
10. Undo the plastic screw securing the pipe.
11. Extract the pipe slightly and remove the hose.
To fit
1. Fit a new hose to the filler pipe, tighten the hose clip.
IMPORTANT: The hose to the filler pipe must always be replaced with a new one. It must not be refitted as it may crack.
2. Make sure the filler pipe is clean and not damaged.
3. Put the filler pipe in place and connect it to the tank.
4. Fit a new plastic screw and tighten it.
