9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
3. Confirm the index markings on the pump and tank aligned. If not, slacken the screw ring slightly using 83 94 462 Wrench, fuel pump and turn the
pump to the correct position. Tighten the screw ring.
Tightening torque 75 Nm (55 lbf ft).
4. Remove the sealing paint in the groove on the Torx screw and remove the screw.
5. Fit the retaining clip in a vice and bend one of the retaining clip wings as illustrated.
6. Check the angle against the template.