saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

SRS Control Module|Page 1288 > < SRS Control Module|Page 1286
Page 1
background image

Air Bag Control Module: Service and Repair

SRS Control Module

WARNING:  Read the Safety and handling directions and Before changing a control module before starting work.

To remove

1. Ignition switch in the OFF position.
2. Remove the centre console.
3. Unplug the control module.

4. Remove the nuts securing the control module.

To fit

The mounting of the control module is directionally dependent. The Supplementary Restraint System (SRS) will not work if the control module is fitted
incorrectly.

After changing the control module, it must be programmed for correct operation. The diagnostic tool  Programming  function is used to carry out the

SRS Control Module|Page 1288 > < SRS Control Module|Page 1286