9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
/l4-2.3l_turbo_(2.3hot)/Page-2640008.png)
12. If the seat-belt has been taken off, re-attach it to the seat.
Slide the rails into the front keys.
Insert the front screws and run the seat forward.
Insert the rear bolts.
Manually adjustable seat. Check that the catches on right and left sides have engaged.
Tighten the rear bolts using a torque wrench.
Slide the seat to the rear.
Manually adjustable seat. Check that the catches on the right and left sides have engaged.
Tighten the front bolts using a torque wrench.
Tightening torque 24 Nm (18 lbf ft)
Check the SRS system and control module with diagnostic tools according to the following:
With the ignition switched to the ON position, connect the diagnostic tool to the diagnostic socket under the dashboard. Clear any diagnostic trouble
codes that are present.
Turn the ignition off and on again. Wait at least 10 seconds with the ignition on.
Check whether a diagnostic trouble code is shown:
