9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
1. Ignition switch in the OFF position.
2. Slide the seat forwards as far as it will go.
3. Pull away the B-pillar trim (fastened with clips) and lift it out of the air duct.
4. Detach the seat-belt bracket in the front seat by pressing in the catch using an angled screwdriver.
5. Remove the belt guide and pass the belt through the B-pillar trim.
6. Unplug the connector from the seat-belt tensioner.
7. Remove the seat-belt reel and tensioner, 3 screws.
To fit