saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Generator Replacement|Page 7811 > < Alternator|Diagrams|Connector Views|Page 7808
Page 1
background image

Alternator: Service and Repair
Generator Replacement

Changing Generator, 4-cyl. LHD

Removal

NOTE:  If the car is equipped with a radio other than a genuine Saab radio, check that the customer has the radio code before commencing work.

1. Drape protective covers over the front wings.
2. Lift off the battery cap and disconnect the negative cable.
3. Remove the shield over the intake manifold.
4. Remove the crankcase ventilation solenoid and constant-pressure valves.
5. Relieve the tension on the belt tensioner and remove it. Use special tool 83 95 254.
6. Remove the generator's upper retaining bolt.
7. Mark and detach the retaining nut on the right-hand engine mounting and lubricate it to give it some mobility.
8. Detach the retaining nut on the rear engine mounting.

Generator Replacement|Page 7811 > < Alternator|Diagrams|Connector Views|Page 7808