saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Wiring Harness Repair|Page 8035 > < Wiring Harness Repair|Page 8033
Page 7
background image

6. Connect the battery drain hose.
7. Fit the left direction indicator and the headlamp.

8. Adjust the main beam and dipped beam as well as the fog lights.

IMPORTANT:

-

Fasten the wiring harness correctly so that there is no risk of it scraping or rattling.

-

Check all rubber grommets to minimize the risk of leakage.

NOTE:  Spray all the connectors (with the exception of the oxygen sensor) with "Kontakt 61" to prevent copper rust from forming. Clean the grounding
points and apply them with Vaseline.

Passenger's Door

Wiring Harness, Passenger Door

Wiring Harness Repair|Page 8035 > < Wiring Harness Repair|Page 8033