9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
/l4-2.3l_turbo_(2.3hot)/Page-2389008.png)
the washer on the right-hand side.
4. Tighten the delivery and return pipes connected to the valve body, holding them against turning. Secure them to the steering gear.
Tightening torque 30 Nm (25 ft. lbs.).
5. Tighten the steering gear retaining bolts.
Tightening torque 95 Nm (70 ft. lbs.).
6. Fit the engine cushion in place and screw in the retaining bolts a few turns.
7. Raise the subframe and tighten the center attachment point bolts.
Tightening torque 100 Nm (75 ft. lbs.) + 45°.
8. Reconnect the exhaust pipe joint located between the catalytic converter and silencer.
9. Mount the subframe's rear attachment points together with the reinforcement.
Tightening torque 100 Nm (75 ft. lbs.) + 45°.
10. Tighten the reinforcement at the subframe's rear attachment point.
Tightening torque 65 Nm (50 ft. lbs.).
11. Screw the track-rod ends on the track rods the same number of turns as when they were removed, but do not tighten the locknuts.
12. Mount the track-rod ends on the steering swivel members.
