saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fitting the Steering Wheel Sealing Strip|Page 8406 > < Fitting the Steering Wheel Sealing Strip|Page 8404
Page 2
background image

5. Unplug the connectors on the rear of the airbag.
6. Undo the steering wheel centre nut a couple of turns and pull the steering wheel to release it from the steering column.
7. Remove the steering wheel centre nut and washer.
8. Withdraw the steering wheel far enough to access the connector on the contact roller.

Unplug the steering wheel harness connector from the contact roller. Make sure the contact roller mechanism is secure.

Fitting the Steering Wheel Sealing Strip|Page 8406 > < Fitting the Steering Wheel Sealing Strip|Page 8404