9-5 Aero (9600) L4-2.3L Turbo (2.3HOT) (2004)
/l4-2.3l_turbo_(2.3hot)/Page-1868005.png)
8. Remove the wedge, raise the suspension arm and connect the steering swivel member. Fit and tighten the bolt.
Tightening torque 50 Nm (37 ft. lbs.)
WARNING: Make sure the steering link pin is visible on top of the steering swivel member before fitting the bolt.
9. Secure the brake hose to the mounting on the steering swivel member and fit the clips. Fit the ABS cable. (2 mountings)
10. Fit the upper engine mounting.
11. Fit the clamp for the steering servo pipe.
12. Tighten the upper bolt on the generator.
13. Fit the belt tensioner.
14. Fit the pulley.
15. Fit the cover for the belt circuit.
