9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
/l4-2.3l_turbo_(b235)_ho/Page-2534001.png)
Antenna Amplifier: Service and Repair
Antenna Amplifier (4D)
To remove
1
Remove the speaker grille on the right-hand side of the parcel shelf.
2
Remove the sealing strip.
3
Remove the trim on the right-hand C pillar to gain access to the antenna amplifier.
4
Undo all connections to the antenna amplifier.
5
Remove the screws holding the antenna amplifier and remove the unit.
IMPORTANT
Be careful with the contact (4). When undoing the Fuba GO-NOGO HF contact, care is required to ensure that it is done correct without damaging the
connection.
To fit
Fit in reverse order.