9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
CD Changer: Service and Repair
CD Changer, Option (4D)
To remove
1
Connect Tech 2.
2
Establish communication with the CD changer (CDC).
3
Select" Programming" in the system menu.
The message "Marriage/Divorce" is displayed.
4
Press" Enter key".
5
Select "DIVORCED" with the change button and press "OK".
-
"DIVORCED" must be selected when removing the CD changer (to be installed in another car or to be returned for warranty repair).
6
The sound should now cease and "CDC CODE" be displayed on SID.
7
Remove the four screws holding the CD changer.
8
Unplug the connector.
To fit
1
Remove 4x transit screws (2 marked red on each side) from the new CD changer.
2
Fit the CD changer with the four screws and plug in the connector.
IMPORTANT
Check that the vertical/horizontal setting on the short side of the CD changer is in the vertical (V) position.
3
While Tech 2 is still connected and communicating, select "Programming" in the system menu. The message" Marriage/Divorce" is displayed.
4
Press" Enter Key".
5
Select "MARRIED" with the change button and press "OK".
-
"MARRIED" must be selected when installing a CD changer into a Saab 9-5.
6
"CDC CODE" disappears from SID and the sound returns.
WARNING
The CD changer is a Class 1 laser product
-
The CD changer should be serviced and repaired by a qualified technician only.
-
If the casing of the CD changer is damaged, laser radiation can occur with a risk of injury