9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
12
Remove the left-hand D-pillar trim and the left-hand concealing panel support (3 screws).
13
Remove the five screws in the top of the left-hand side trim and lift out the trim.
14
Remove the four screws and washers securing the CD changer.
15
Unplug the connector.
To fit
1
Remove 4x transit screws (2 marked red on each side) from the new CD changer.
2
Fit the CD changer with the four screws and washers, plug in the connector. Fit the CD magazine.
IMPORTANT
Check that the vertical/horizontal setting on the short side of the CD changer is in the vertical (V) position.
3
While Tech 2 is still connected and communicating, select "Programming" in the system menu. The message" Marriage/Divorce" is displayed.
4
Press" Enter Key".
5
Select "MARRIED" with the change button and press "0K".
" MARRIED" must be selected when installing a CD changer into a Saab 9-5.
6
"CDC CODE" disappears from SID and the sound returns.