9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
To remove
1
Take the front seat out of the car.
2
Undo the straps holding the backrest upholstery at the bottom.
Undo the cables and cable ties. Extract the cables from the hole.
3
Release the upholstery strips on the underside.
4
Pull out the sheet from the backrest upholstery.
5
Undo the rear of the backrest upholstery by releasing the upholstery strips along the sides and folding back the upholstery.
6
Release the upholstery strips along one side at the rear of the backrest frame.
7
Remove the knob for the lumbar support adjustment.
8
Detach the upholstery hooks in the underside of the backrest
9
Fold aside the upholstery and cushion at the side of the backrest.
10
Unscrew the motor for the backrest adjustment, 2 screws.
11
Lift the motor off the gear wheel.