9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
2
Lift in the 40% backrest and insert the pin into the backrest center hinge. Press down on the outer frame of the backrest until the catch locks.
NOTE: Check that the center seat belt runs in front of the spindle pins and backrest.
3
Reattach the upholstery hooks at the seat-belt mounting.
4
Fold back and lock the backrest, and fold down the seat cushions.
Rear seat backrest, 5D
To remove
The 40% part of the backrest can be removed separately. This must be done before the 60% part can be removed.
1
Fold forward the rear seat cushions.
2
Fasten the rear seat belts on the belt holders on the C-pillars.
3
Fold forward the 40% backrest slightly and undo the upholstery clip.
4
Release the catch by the sill with a screwdriver and lift off the backrest (upwards).
5
Pull away the backrest from the hinge pin by the center joint and lift out the backrest.
6
Remove the center seat belt lower mounting.