9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
/l4-2.3l_turbo_(b235)_ho/Page-1847002.png)
1. Connect the new brake hose to the brake line and fit the clip.
2. Connect the hose to the brake caliper, using a torque wrench. Make sure that the hose is turned by the correct amount.
Tightening torque 45 Nm (33 ft. lbs.)
3. Bleed the system, refer to Brake Bleeding, Service and Repair.
4. Fit the wheels and tighten the wheel bolts, using a torque wrench.
Tightening torque 110 Nm (80 ft. lbs.).
IMPORTANT: The wheel must hang freely when the wheel bolts are being tightened.
5. Check the brake hose connections for leakage.
