saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Turbocharger > < Throttle Cable/Linkage|Description and Operation|Page 4910
Page 5
background image

5

Remove the throttle adjustment clip. Adjust the play in the cable by holding the throttle cam in the closed position with one hand and pulling the
cable through with the other until it is taut. Then slacken to the nearest sleeve groove. Fit the clip.

6

Plug in the connector for the floor lighting. Spray the connector with Kontakt 61, part no.30 04 520.

7

Fit and tighten the 2 screws in the data link connector.

8

Fit the lower panel (3 bolts).

9

Replace the data link connector cover.

Turbocharger > < Throttle Cable/Linkage|Description and Operation|Page 4910