9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
/l4-2.3l_turbo_(b235)_ho/Page-971001.png)
Absolute Pressure Sensor: Service and Repair
To remove
1
Unplug the ignition discharge module 10-pin connector and bend it to one side.
2
Unplug the sensor connector.
3
Undo the connector.
To fit
1
Check the sealing washer and fit a new one if necessary.
Apply Vaseline (part no.30 04 520) or equivalent to the sensor threads. Fit the sensor.
Tightening torque 17 Nm (12 lbf ft)
2
Spray the connector with Kontakt 61 (part no.30 04 520). Plug in the connector.
3
Plug in the ignition discharge module 10-pin connector.
