9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
2. Fit the circlip with the opening facing downwards.
3. Press in the hub using Drift, front- wheel bearings 89 96 704 (KM-500-3 and KM-500-5).
4. Fit the drive shaft in the hub and pull it in with a new hub center-nut.
IMPORTANT: A new hub center-nut should always be fitted if it has been removed since the clamping force of the lock embossing will be
reduced if refitted.
5. Refit the holder for the ABS sensor and the brake backplate.