9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
/l4-2.3l_turbo_(b235)_ho/Page-1664002.png)
9. Unplug the connector from the pedal switch.
10. Remove the screws securing the pedal bracket to the steering wheel member
11. Unhook the spring from the clutch pedal.
12. Remove the clip and extract the pin.
13. Detach the steering shaft joint from the steering gear. Do not open the splined joint on the steering shaft
WARNING: The steering shaft must never be separated
14. Remove the screws securing the steering wheel member.
15. Move the steering wheel member back far enough to allow the pedal bracket to be removed.
16. Lift out the pedal bracket.
To Fit
1. Fit the pedal bracket without doing up the nuts.
2. Check that the foam-rubber insulation between the pedal brackets is correctly positioned.
3. Fit (but do not tighten) the screws securing the pedal brackets to the steering wheel member.
