saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

System Overview|Page 7479 > < System Overview|Page 7477
Page 17
background image

with information on switches are activated.

The SID supplies the steering wheel controls with +5 V via pin 22 and grounds them via pin 9.

The 7 steering wheel switches consist of 7 resistors connected in series. When a button is pressed, the switch concerned is grounded.

When a switch is pressed, the total resistance in the circuit changes, as does the voltage value which SID then reads.

The horn switch (41) is connected in parallel with the steering wheel switches and when it is pressed, pin 22 is grounded direct to pin 9.

The table shows the correlation between the voltage on pin 22 and the switch that is activated.

The SID uses the information to activate the horn and send bus information for the audio functions.

On cars without steering wheel controls (cars without audio system), only the steering wheel switch for the horn is used.

Diagnostics

In the event of a break/short to B+ or short-circuit to ground for more than 5 minutes, diagnostic trouble code B2371 will be generated. This applies
only to cars with the Saab Audio System having steering wheel controls.

Coolant Level Sensor

Coolant Level Sensor

System Overview|Page 7479 > < System Overview|Page 7477