9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-2336038.png)
6. Press "SET" to store the "month".
7. "Date" begins to flash. Select in the same way as point 3.
8. Press "SET" to store the "date".
The year, month and date are stored when SET or CLEAR is pressed, and when the ignition is turned off.
Trip Computer Functions SID 1/SID 2
Trip Computer Functions SID 1/SID 2.
Outside temperature
The current outside temperature will be shown in the SID display if the TEMP function is selected or the temperature warning function is activated. The
outside temperature will then be shown automatically. Information on the outside temperature comes from the sensor in the front spoiler.
A temperature warning function is built into the SID and works as follows:
If the temperature falls from a higher temperature down to +3 °C (37 °F) or rises from a lower temperature to -3 °C (26 °F), the outside temperature is
automatically displayed irrespective of the SID unit display setting.
This display remains until another function is selected.
To avoid the effect of radiant heat, the temperature sensor reading is updated differently depending on whether the outside temperature is rising or
falling, and is speed-dependent.
The reading is updated as follows:
-
+1 °C (1.8 °F) every 6 minutes at speeds below 30 km/h.
-
+1 °C (1.8 °F) every 30 seconds at speeds above 30 km/h.
-
-1 °C (1.8 °F) every 2.5 seconds.
