9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS 5.4
ABS Hydraulic Unit And Control Module
To Remove
1. Release the Maxi-fuse holder.
2. Unplug the electrical connector on the anti-theft alarm.
3. Cut off the cable ties securing the positive battery lead to the main fuse box.
4. Undo the nuts and move the main fuse box out of the way.
5. Suspend the main fuse box from a cable tie.
6. Use a clamp to depress the brake pedal about 50 mm to prevent brake fluid escaping from the master cylinder(
7. Unplug the connector and tuck it out of the way.
8. Use an air gun to clean the surfaces around the brake-pipe couplings.
9. Undo the brake-pipe couplings using a brake spanner and plug the openings.
10. Place a cover over the splash guard to protect it from any brake-fluid spillage.
11. Undo the nuts on the hydraulic unit.
12. Lift out the hydraulic unit, taking care not to damage the pipes.
To Fit