9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-716002.png)
8. Remove the locating pins in the timing cover by cutting an internal thread in them using a 3/8n UNC thread tap and withdraw them with Sliding
Hammer 83 90 270.
9. Remove all timing cover retaining bolts.
10. Pull the timing cover away, starting at the bottom.
11. Then lift the cover outwards/downwards to avoid damaging the gasket at the cylinder head.
To fit
1. Thoroughly remove ail remains of sealant on all surfaces. Wash clean with suitable cleaner.
2. Apply a bead of Loctite 518 about 1 mm thick along the middle of the sealing surfaces.
3. Fit the timing cover, carefully turning it into position. Fit the retaining bolts but do not tighten them. Tap the locating pins in place.
4. Tighten the timing cover, using a torque wrench.
Tightening torque 22 Nm (16 ft. lbs.).
