9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
1.
Fit the new heat exchanger housing to the evaporator casing. Tighten the screws and fit the 4 clips. Make sure the air shield on the heat exchanger
housing bears against the seal and the guide in the evaporator casing.
2.
Fit the heat exchanger housing by carefully inserting the heat exchanger into the heat exchanger housing and tightening the 2 upper screws. Fit the
cover over the heat exchanger and tighten the 2 lower screws.
Tightening torque 1.4 Nm (1 lbf ft)