9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
7
Lower the receiver under the car.
To fit
1
Adjust the oil volume in the compressor, see Air Conditioning Compressor/Compressor Oil/Service and Repair.
Lift up the receiver and holder to the condenser.
2
Adjust the position of the receiver so that the PAD connections are parallel.
3
Lubricate the O-ring and fit the receiver.
4
Remove the plugs and lubricate the O-rings on the receiver pipes.
5
Screw on the A/C pipe connections to the receiver.
Tightening torque: 8 Nm (5.9 ft. lbs.)
6
Fit the front covering below the radiator unit.
7
Vacuum pump the A/C system and fill with R134a refrigerant, see Refrigerant, A/C/Service and Repair.