saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Main Relay (229)|Page 3757 > < Main Relay (229)|Page 3755
Page 2
background image

When the ignition is turned to the "OFF" position1 the main relay will operate for a further 10 seconds to enable adaptation of the throttle valve to fully
closed position.

Diagnostics

-

If There is an open circuit or short circuit to ground, diagnostic trouble code P1652 will be generated.

-

If There is a short circuit to B+, diagnostic trouble code P1653 will be generated.

-

If the current to Control module pin 1 is missing, diagnostic trouble code P1640 will be generated, the throttle will close and the engine will stop.

NOTE:  In Trionic T7, the main relay is always active when the ignition on. The current from the main relay can be read with the diagnostic tool.

Main Relay (229)|Page 3757 > < Main Relay (229)|Page 3755