saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Wastegate > < Engine - Reduced Performance/Turbo DTC's Set|Page 3866
Page 2
background image

7. Remove the front grille.
8. Remove the headlamps and direction indicators and set aside.
9. Suspend the capacitor with a cable tie, part No. 83 95 212.

10. Remove the charge air cooler's bracket from the condenser.
11. Lift out the charge air cooler.

To fit

Note:  Spray the connector with Kontakt 61 contact cleaner, part No. 30 04 520.

Fit in the reverse order. See the tightening torques specified below for direction indicators without screw slots. Check the headlamp alignment.

Tightening torques:
Charge air cooler/condenser 8 Nm (6 ft. lbs.) 
Screw for direction indicator, hole fitting 1.5 Nm (1 ft. lbs.) 

Wastegate > < Engine - Reduced Performance/Turbo DTC's Set|Page 3866