9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-879002.png)
5. Pull down the cable and remove the oxygen sensor.
To fit
IMPORTANT
The oxygen sensor is sensitive to impact and jolting and must be handled with care. It is important that the connections between the oxygen sensor and
nipple are gas-tight.
1. Coat the oxygen sensor threads with Molycote 1000 (30 20 971) to prevent binding.
2. Fit the oxygen sensor.
Tightening torque 55 Nm (41 lb ft)
3. Lead the cable as far up as it will go. Lower the car.
