9-5 Aero Wagon (9600) L4-2.3L Turbo (B235) HO (2001)
/l4-2.3l_turbo_(b235)_ho/Page-2084024.png)
14. Remove the side airbag, 3 nuts.
15. Lift out the side airbag.
To fit
Fit in reverse order.
Check the SRS system and control module with the diagnostic tool as follows:
With the ignition in the ON position, connect the diagnostic tool to the diagnostic socket under the dashboard. Delete any trouble codes.
Switch off the ignition and switch it on again. Wait at least 10 minutes with the ignition switched on.
Check whether a diagnostic trouble code (DTC) is displayed:
If a diagnostic trouble code is displayed:
Carry out fault diagnosis in accordance with the directions given for each DTC.
If no diagnostic trouble code is displayed:
Fitting completed correctly. Disconnect the diagnostic tool.
